SiT1532是目前世界上体积较小,功耗较低并优化了手机和其他电池供电的32KHz振荡器。 SiTime的MEMS技术使它有较小的1.5×0.8 CSP芯片级封装,超越石英较小封装XTALs。SiT15xx系列以多种方式克服了基于石英器件的限制,电路板占位面积减小了85%,功耗降低了50%,可靠性提高了15倍,所有这些都有助于实现体积更小、功耗更低和更耐用的移动电子产品。
SiT1532可在1.5V -3.63V 电压范围稳定工作,支持锂电、超级电容等供电设备供电。 内置滤波电路,无需额外的Vdd旁路电容。 SiT1532输出驱动能力强,无需额外负载电容,在智能仪表,可穿戴产品乃至基础性时钟产品领域具备广泛的应用前景。
频率 | 32.768KHz |
频率稳定性(ppm) | ±75,±100 |
输出类型 | LVCMOS, NanoDrive™ |
NanoDrive™ | 300mV to 700mV, full swing LVCMOS |
工作温度范围(℃) | -10 ~ +70,-40 ~ +85 |
工作电压(V) | 1.2 ~ 3.63 |
封装尺寸(mm2) | 1.5x0.8 |
特点 | 低功耗、小封装尺寸 |
状态 | 量产 |
SiT1532具有芯片级封装尺寸(CSP)
SiT1532具有纳米级功率:900 nA(典型值)
SiT1532工作电压低至1.2V
SiT1532 NanoDrive™减摆振荡器输出
SiT1532 空载或VDD滤波电容器
SiT1532在-40°C至+85°C温度范围内的频率稳定性<100 ppm
● 健康和健康监测器 | ● 超小型笔记本电脑 | ● 电池管理计时 | ● 零售电子产品 |
● 平板 | ● 智能手机 | ● 健身手表 | ● 运动摄像机 |
● 无线键盘 | ● RTC参考时钟 | ● 医疗监测 | ● 地震传感器 |
● 远程通信 | ● 资产跟踪 | ● 智能农业 | ● 智慧城市 |
● 智能手表 | ● 健身跟踪器 | ● 移动配件 | ● 智能眼镜 |
● 电子消费品 | ● 虚拟现实 | ● 家庭自动化 |
功能引脚示意图 | 脚位 | 功能 | 说明 | |
1,4 | GND |
Power Supply
Ground
|
Connect to ground. Acceptable to connect pin 1 and 4 together.
Both pins must be connected to GND.
|
|
2 | CLK Out | OUT | Oscillator clock output. The CLK can drive into a Ref CLK input or into an ASIC or chip-set’s 32kHz XTAL input. When driving into an ASIC or chip-set oscillator input (X IN and X Out), the CLK Out is typically connected directly to the XTAL IN pin. No need for load capacitors. The output driver is intended to be insensitive to capacitive loading. | |
3 | VDD | Power Supply |
Connect to power supply 1.2 V ≤ Vdd ≤ 3.63 V. Under normal operating conditions, Vdd does not require external bypass/decoupling capacitor(s).
For more information about the internal power-supply filtering, see the Power Supply Noise Immunity section in the detailed description.
Contact factory for applications that require a wider operating supply voltage range.
|
sitimechina.com ©北京晶圆电子有限公司 版权所有 京ICP备13034140号-2